Mai Inganci Mai Inganci Nau'in Bututun Bututu Mai Kaya Mai Kaya Na Masana'antar China
Menene nau'in wafer ɗin Pneumatic malam buɗe ido?
Nau'in wafer ɗin bawul ɗin malam buɗe ido na Pneumatic , ana kuma kiransa da "concentric", "roba mai layi" da "roba da aka zauna" bawul ɗin malam buɗe ido, yana da wurin zama na roba (ko mai jurewa) tsakanin diamita na waje na faifan da bangon ciki na bawul ɗin.
Bawul ɗin malam buɗe ido bawul ne mai juyawa kwata-kwata wanda ke juyawa digiri 90 don buɗewa ko rufe kwararar kafofin watsa labarai. Yana da faifan zagaye, wanda aka fi sani da malam buɗe ido, wanda ake samu a tsakiyar jiki wanda ke aiki a matsayin hanyar rufe bawul ɗin. Ana haɗa faifan da mai kunnawa ko madauri ta cikin shaft, wanda ke ratsawa daga faifan zuwa saman jikin bawul ɗin.
Ana kuma amfani da bawul ɗin malam buɗe ido azaman bawul mai daidaita kwararar ruwa, idan faifan bai juya zuwa cikakken juyawa na kwata ba, yana nufin bawul ɗin a buɗe yake kaɗan,Za mu iya daidaita kwararar ruwa ta hanyoyi daban-daban na buɗewa.
(Taswirar CV/KV na bawul ɗin malam buɗe ido mai jurewa yana samuwa idan an buƙata)
Babban Siffofi na NORTECH Nau'in wafer ɗin malam buɗe ido na Pneumatic
Wafer mai waferBawul ɗin Malam Buɗaɗɗe fasalin ƙira na faifan mara pinless
Babban fasalulluka naWafer mai waferBawul ɗin Malam Buɗaɗɗe
- Ƙaramin gini yana haifar da ƙarancin nauyi, ƙarancin sarari a ajiya da shigarwa.
- Matsayin shaft na tsakiya, matsewar kumfa mai kusurwa biyu 100%, wanda ke sa shigarwa ya zama abin karɓa a kowace hanya.
- Babban flange na ISO 5211 ya dace don sauƙin sarrafa kansa da kuma sake daidaita mai kunna wutar lantarki.
- An saka rufin a jiki, layin da yake da sauƙin maye gurbinsa, babu tsatsa tsakanin jiki da rufi, ya dace da amfani da layin ƙarshe.
Shaft mai daidaici
ƙira don diamita DN32-DN350
Hannun roba da aka ƙera
Tsarin Shaft mai siffar hexagon
don diamita DN400 da sama
don Allah a dubakundin mu na bawuloli na malam buɗe idoDon ƙarin bayani ko tuntuɓi ƙungiyar tallace-tallace tamu kai tsaye.
Bayani na fasaha na nau'in wafer ɗin bawul ɗin malam buɗe ido na Pneumatic
Ma'auni:
| Zane da Mai Ƙirƙira | API609/EN593 |
| Fuska da fuska | Jerin ISO5752/EN558-1 20 |
| Ƙarshen flange | ISO1092 PN6/PN10/PN16/PN25,ANSI B16.1/ANSI B 16.5 125/150 |
| Matsayin matsin lamba | PN6/PN6/PN16/PN25, ANSI Class 125/150 |
| Gwaji da Dubawa | API598/EN12266/ISO5208 |
| Kushin hawa mai kunnawa | ISO5211 |
Babban kayan sassa of Wafer mai waferBawul ɗin Malam Buɗaɗɗe:
| Sassan | Kayan Aiki |
| Jiki | Baƙin ƙarfe na Ductile, ƙarfe na carbon, ƙarfe mara ƙarfe, ƙarfe mai duplex, Monel, Alu-tagulla |
| Faifan diski | An rufe ƙarfe mai rufi da nickel, an rufe ƙarfe mai rufi da nailan/Alu-tagulla/bakin ƙarfe/duplex/Monel/Hasterlloy |
| Layin layi | EPDM/NBR/FPM/PTFE/Hypalon |
| Tushe | Bakin karfe/Monel/Duplex |
| Bushing | PTFE |
| Ƙullun | Bakin karfe |
Aikace-aikacen Samfura: Nau'in wafer ɗin malam buɗe ido na Pneumatic
Ina ake amfani da nau'in wafer ɗin wafer mai jurewa wanda aka zaunar da shi na bawul ɗin malam buɗe ido?
Nau'in wafer ɗin bawul ɗin malam buɗe ido na Pneumatic ana amfani da shi sosai a cikin
- Cibiyoyin tace ruwa da sharar gida
- Takarda, yadi da masana'antar sukari
- Cibiyoyin iska mai matsewa, iskar gas da kuma na desulfurization
- Masana'antar sarrafa giya, narkar da sinadarai, da kuma sarrafa sinadarai
- Sufuri da sarrafa busassun kayan aiki
- Masana'antar wutar lantarki
Bawuloli masu ƙarfi da ke zaune a wurin suna da takardar shaida daWRASa Burtaniya kumaACSa Faransa, musamman don aikin ruwa.
Bayanin Conformité Sanitaire
(ACS)
Tsarin Ba da Shawara Kan Dokokin Ruwa
(WRAS)
